Festo Compact Performance CPV Series, Manual

Page: 19 / 74

1. Installation
1−7
Festo P.BE−CP−SD8−...−EN en 0503b
1. Apply 24 V to the CPV valve terminal. Connect the bus
connection of the CPV valve terminal to the bus.
2. Switch on the Activator. Wait until the following menu
appears:
F1 – Select Device
F2 – Data/Function
F3 – Test
F4 – Bus Status
Please note
The bus must be activated in order to synchronize the
Handheld Activator, i.e. data exchange between bus slaves
must be possible.
3. Press key F1 Select Device. The following menu will ap
pear:
Address: NONE
F1 − Select Device
F2 − Change Address
F3 − Options