Ferrari 575M Superamerica, Owner'S Manual

Page: 49 / 166

49
3
ABOUT YOUR VEHICLE
Tyre pressure check request
without indication of the wheel
Activated for a few seconds
after the engine has started. It indicates
a drop in pressure with respect to the
last value stored. The system ignores
which tyre is involved since it has not yet
identified the position.
Check the pressure of all the tyres.
Tyre pressure check request
Activated for a few seconds
after the engine has started, but
unlike before, the system indicates which
wheel is signalling the fault.
Check the pressure of the tyre indicated.
Puncture without wheel
indication
Activated when a puncture
occurs, ignoring the tyre involved since
the system is not yet calibrated. It
remains on until the ignition key is turned
to position
0.
Follow the instructions in the section
“Replacing the wheels” on page 128,
when only one tyre has a puncture.
Puncture with wheel indication
Activated when a puncture
occurs, indicating the tyre
involved. It remains on until the ignition
key is turned to position
0.
Follow the instructions in the section
“Replacing the wheels” on page 128,
when only one tyre has a puncture.
System calibration request
Activated for a few seconds
after turning the ignition key to
position II to signal that the system is not
calibrated.
Adjust the tyre pressure and calibrate the
system (see on page 61).
Confirming the calibration
procedure
With the ignition key in position
II
(without starting the engine) the
warning light comes on after pressing the
calibration button for about 5 seconds.
The warning light goes off when the
engine has started.
During calibration, the tyre condition
may be displayed partially (pressure not
shown) even if the system has already
learned the position from the sensors.