FENDT FORMER 12545 PRO, Operator'S Manual, Page: 6 / 76

4 FORMER 12545 PRO
7.7.4 Adjusting the height of the swath former 52
7.7.5 Adjusting the swath formation 53
7.7.6 Adjusting the lateral inclination 53
7.7.7 Adjusting the longitudinal inclination 55
7.7.8 Adjusting the sequential control 55
7.7.9 Setting the two-rotor operation mode 56
7.7.10 Setting individual rotor operation mode 56
9.1 After hitting an obstacle 60
9.2 Emergency operation 60
9.2.1 Lifting rotors into the transport position 60
9.2.2 Lowering rotors into working position 61
9.2.3 Lifting rotors into the headland position 61
9.2.4 Setting the working width in emergency operation 61
9.2.5 Setting the swath width in emergency operation 61
9.2.6 Setting the working height in emergency operation 61
10.1 Maintenance intervals 62
10.2 Cleaning 63
10.3 Tightening torques for nuts and bolts 63
10.4 Decals 63
10.5 Transmission shaft maintenance 64
10.6 Servicing the hydraulics 64
10.7 Brake system maintenance 67
10.7.1 Checking the thickness of the brake pads 67
10.7.2 Tightening brake cylinders 67
10.7.3 Drain the water from the compressed air reservoir 68
10.8 Gearbox maintenance 68
10.8.1 Checking gearbox GT-30 oil level 68
10.8.2 Checking gearbox GT-40 oil level 68
10.8.3 Checking transfer gearbox oil level 68
10.9 Tire maintenance 69
10.9.1 Changing wheels 69
10.9.2 Tire pressure 69
10.10 Lubrication instructions 69
11.1 Storage 71
11.2 Disposal 71