FENDT FORMER 12545 PRO, Operator'S Manual, Page: 56 / 76

Using the machine
54 FORMER 12545 PRO
Lateral inclination adjustment
Gyro Position Altitude
Front right a 0 cm
b 2 cm
c 1 cm
Front left a 0 cm
b 1 cm
c 2 cm
Rear a 0 cm
b 1 cm
c 1 cm
 Ensure that the tire pressure of all con-
tact wheels is identical.
Setting the lateral inclination of the front
rotors
Setting is carried out at the trailing wheels
of the rotor chassis on the front rotors.
Trailing wheel
 Lift the rotor into the headland position.
 Hold the wheel tight.
 Remove the linch pin (1).
 Take down the upper washers (2).
 Pull out the axle of the wheel guide.
 Place the desired number of washers
onto the axle of the wheel guide.
 Push the axle of the wheel guide back
in.
 Place the remaining washers on top.
 Secure the axle of the wheel guide us-
ing the linch pin.
Setting the lateral inclination of the rear
rotors
Setting is carried out on the tandem axles
on the right-hand side of the rotor chassis
of the rear rotors.
Tandem axle
 Loosen the two bolts (1) and the lock
nut (2) on the adjusting screw (3).
 Turn the adjusting screw to the desired
position.