FENDT FORMER 12545 PRO, Operator'S Manual, Page: 14 / 76

Safety
12 FORMER 12545 PRO

The technically permissible maximum
speed is 40 km/h. Observe national
speed limit regulations.
 On public roads and lanes, the machine
must be driven in transport position
only.
 Riding on the machine is prohibited.
2.5.8 Maintenance work
It is necessary to perform maintenance
work on the machine to guarantee that it is
in a safe operating condition and to avoid
any unnecessary repairs. Performing work
incorrectly can lead to injuries.
 Before carrying out maintenance work,
switch off the tractor engine and re-
move the ignition key.
 Only perform maintenance work as de-
scribed in these instructions.

Any work that is not specified in these
instructions must only be carried out by
specialist personnel in a specialist work-
shop.

Repairs to tires and wheels must only
be carried out by specialist personnel
using the appropriate fitting tools.
2.5.9 Working with hydraulics
Incorrect connections can lead to reversed
operation (e.g. raising/lowering).

Observe the markings on the hydraulic
hoses to avoid mixing up the hoses.
Escaping high-pressure fluids can pene-
trate the skin and cause serious injuries
and/or infections.

Any work on hydraulic systems must
only be carried out by authorized quali-
fied personnel.
 Before starting work, release the pres-
sure in the hydraulic system.
 Inspect the hydraulic lines before each
use and replace any lines that show
signs of damage or ageing.
 Check for leaks using a piece of card-
board or wood. When doing so, do not
direct the oil jet towards your body.

In the event of injuries, seek medical at-
tention immediately.
2.5.10 Work in the vicinity of high-
voltage power lines
Particular care must be taken when work-
ing under or close to high-voltage power
lines. In particular, this applies when folding
up the machine and traveling with the ma-
chine in transport position.
 Before carrying out planned work close
to high-voltage power lines, obtain the
necessary information about the rated
voltage and the minimum overhead line
clearance from the relevant operator.

The safety distances must not fall short
of the values in the table under any cir-
cumstances.
Rated voltage
[KV] Safety distance from
overhead lines [m]
≤1 1
>1-110 3
>110-220 4
>220-380 5
2.5.11 Unauthorized modifications or
alterations
If unauthorized modifications or alterations
are carried out, the machine can present a
danger.

Do not carry out any modifications or al-
terations to the machine that have not
been discussed with and authorized by
the manufacturer.
2.5.12 What to do in an emergency
In the event of a dangerous situation, fast
action is required to protect the user or an-
yone else from being injured.
 Switch off the tractor immediately.
 Contact the emergency services if nec-
essary.
2.5.13 Fire prevention
Regular maintenance and cleaning of the
machine will reduce the risk of fire.