The CONTROLS LAYER of each preset displays information on whatever amp or effect is highlighted in the
SIGNAL PATH LAYER. Amp control knob settings are displayed by default (
see illustration below
); effects con-
trol settings are displayed when an effect is highlighted in the SIGNAL PATH LAYER. Amp and effects controls
are selected by turning the ENCODER.
Each preset can be used as is. With many different amp models, effects types and control settings to choose
among, however, each preset’s SIGNAL PATH LAYER and CONTROLS LAYER settings can easily be modified
and saved for personally individualized sounds (
see next section, “Editing and Saving Presets”
).
A preset can also be moved to a different position or cleared from the list of presets. Further, the entire list of
presets can be restored to its factory state. To perform these functions, see “Preset Organizer” (
page 51
).
ROCK & ROLL
TWIN
REVERB
AMPLIFIER
PRES
REVERB
FUZZ
Close-up detail of the CONTROLS LAYER, in which the gain control for
the amp model within the preset is selected.
EDITING AND SAVING PRESETS
Within each preset, the amplifier control knob settings, amp models, and effects types and parameters can
be tailored to individual preference. When a preset is selected, the box containing its number is blue, indicat-
ing that no edits have been made to it (
see illustration below
).
When edits to a preset have been made, the box containing the preset number changes to red, and the SAVE
utility button illuminates (
see illustration below
).
TWIN
REVERB
ROCK & ROLL
PRES
REVERB
FUZZ
SAVE
TWIN
REVERB
ROCK & ROLL
PRES
REVERB
FUZZ
5
