Fender Mustang GTX Series Owner'S Manual Download Page 19

Page: 19 / 66

TOUCH WAH

WAH

COMPRESSOR

SIMPLE COMP

RANGER BOOST

back

Select an effect by scrolling to it and pressing the ENCODER.

ROCK & ROLL

TWIN

REVERB

FUZZ

WAH

BABY

POST FX 1

The newly added effect, highlighted with a white arrow below it and label above it, appears in a green box indi-

cating that it can be left in place or moved to a different position in the signal path by turning the ENCODER.

ROCK & ROLL

TWIN

REVERB

FUZZ

WAH

PRE FX 2

BABY

After moving the newly added effect by turning the ENCODER,

press the ENCODER to select its new position in the signal path.

ROCK & ROLL

TWIN

REVERB

FUZZ

WAH

SAVE

POST FX 1

BABY

With the added effect in position (as indicated here by white arrow below it and label above it), continue edit-

ing other parameters or press the illuminated SAVE utility button to keep completed edits.

MODULATION

STOMPBOX

DELAY

REVERB

Select an effects category by scrolling to it and pressing the ENCODER.

Summary of Contents for Mustang GTX Series



































































Search results

Summary of Contents for Mustang GTX Series

Reviews:

Related manuals for Mustang GTX Series

Brands by name

Popular brands

Fender Mustang GTX Series, Owner'S Manual

Search results

Summary of Contents for Mustang GTX Series

Reviews:

Related manuals for Mustang GTX Series

Brands by name

Popular brands