Page | 37
User Manual – FELIX Pro 1
Rev 3
www.FELIXprinters.com
[email protected]
9.2
Slicing profiles
To get the most out of your printer, you need to select the correct slicing settings for each print job.
Choosing the correct settings, can have a big impact on the print output.
We tried to make it as simple as possible. In this chapter we will explain the basics for in depth information
please read the FELIXbuilder full manual.
In the FELIXbuilder there are several slicing profiles present. We will first explain the several options. Then
we will explain what is a best practice.
Below is an overview of the settings:
Layer Height. This determines the layer height of each printed layer. The smaller, the nicer the object will
look, but it will take more time to print:
0_Normal Detail (200 µm)
1_High Detail (150 µm)
2_Very High Detail (100 µm)
Build Strategy. When you’ve chosen a layer height it is recommended to choose the corresponding build
strategy. In the strategy, the print speeds are configured.
0_Single Head_Normal Detail
0_Dual Head_Normal Detail
1_Single Head_High Detail
1_Dual Head_High Detail
2_Single Head_Very_High Detail
2_Dual Head_Very_High Detail
When you for instance choose the 0_normal Detail setting, it is recommended to choose the 0_Single
Head_Normal Detail or 0_Dual Head_Normal Detail for the build strategy.
