Page | 18
User Manual – FELIX Pro 1
Rev 3
www.FELIXprinters.com
[email protected]
7.4
Turn on the heaters
Turn on the heaters by following the next steps on the display unit:
Back
Quick settings
Print file
Position
Extruder
Fan speed
Back
Bed temp : 20.1/ 55°C
Temp. 1 : 20.1/ 0°C
Temp. 2 : 20.1/ 0°C
Turn extr 1 off
Turn extr 2 off
E:
0.00mm
1 click = 1mm
E:190.3/190°C =>-0.10
0.0 m printed
Back
Bed temp : 20.1/ 55°C
Temp. 1 : 20.1/ 0°C
Temp. 2 : 20.1/ 0°C
Turn extr 1 off
Turn extr 2 off
Turn extr 1 off
Turn extr 2 off
Select extr. 1
Select extr. 2
Extr. Position
Set Origin
Turn extr 1 off
Turn extr 2 off
Select extr.
1
Select extr. 2
Extr. Position
>>
Set Origin
Go to extruder settings.
Note: This example is for PLA
Select the bed temp. and rotate the
button until it is set to 55
°
C and push
the button to confirm.
Scroll down and make sure extruder
1 is selected.
Set the temp. of extr. 1 to 190
°
C.
Note: never turn the printer off
when the extruder is above 100
°
C.
Wait until the extruder has reached
the set temperature of 190
°
C.
Navigate down and select extr. position.
