Page | 14
User Manual – FELIX Pro 1
Rev 3
www.FELIXprinters.com
[email protected]
6.6.2
CABLES
1.
Turn the power off
2.
Insert the power cable and connect with a power outlet.
3.
Insert the USB cable and connect it to your computer
4.
Turn the power on.
Caution:
Never turn off the printer for longer than 20 seconds while heaters are still above 100degC.
The heat in the heater part of the hot-end can travel upwards if the top part is not actively
cooled. This can cause a clog/filament jam in the hot-end.
Make sure the power is turned off when connecting the display. Failing to do so may cause
serious damage
The printer setup is done. Please
continue to the next step to make your
first print.
ON/OFF switch
Power inlet
USB
