Page | 15
User Manual – FELIX Pro 1
Rev 3
www.FELIXprinters.com
[email protected]
7
3D PRINT PREPARATIONS
Basically to ensure your 3D print finishes successfully, at least make sure the following is true:
A perfectly clean heated bed surface.
A calibrated printer
Proper installation of filament guiding accessories.
Good quality filament
The above points will be explained in more detail in this chapter.
7.1
Turn On the printer/General display unit overview
You can control the printer with the display unit. To navigate through the menu, rotate the button and
push the rotary button to execute a command.
Below is an overview of the main screen of the display unit.
E: 0.00mm
Mul: 100%
Buf: 0
189.1/ 190°
189.1/ 190°
55.3/ 55°
X: 0.00
Y: 0.00
Z: 0.00
Idle
Actual heater
temperatures.
Mul = Speed over
ride
Buf = Amount of
movement
commands pending
Extruder position
Actual position
of printer.
Fan speed
Target heater
temperatures.
Status
