TST
Assembly instructions
FUZ2 -A/-B/-C/-CX/-G/-L
FEIG ELECTRONIC GmbH
Page 4 of 96
TST_FUZ2-A-B-C-CX-G-L_Montageanleitung_EN_22.docx
Notes
©
Copyright 2017 by
FEIG ELECTRONIC GmbH
Lange Straße 4
D-35781 Weilburg
Tel.: +49 6471 3109 0
Version: 2022-07-13
This edition replaces all earlier versions.
The specifications in this document are subject to change without notice.
The transmission and reproduction of this document, its use and the disclosure of its contents are
prohibited unless expressly authorised. Infringement of this provision will result in liability for
damages. All rights for any patent grant or registration of a utility model are reserved.
These assembly instructions are especially directed to the commissioning engineer of the
TST FUZ2
door
controller from FEIG ELECTRONIC GmbH. The installation and commissioning of the controller shall only be
carried out by officially trained electrical experts who are familiar with the safety standards of electrical drive
and automation technology.
The distributor of the machine is solely responsible for the completeness of the operating instructions for the
machine (in this case the door). The operating instructions for the door controller that is installed by the
manufacturer of the door shall be supplied in one of the languages of the European Community that is
accepted by the manufacturer of the machine.
This manual shows only a small range of the controller functions and provides no warranty of properties.
Additional functions and descriptions for individual door functions as well as more precise specifications for
the controller and hazard warnings are available in the main description.
The information in this document has been compiled according to the best of our knowledge and belief. FEIG
ELECTRONIC GmbH does not warrant the correctness and completeness of the information in this
document. In particular, FEIG ELECTRONIC GmbH cannot be made liable damage resulting from erroneous
or incomplete information.
In spite of our best efforts, mistakes cannot be avoided completely and we will always gratefully accept any
information in this respect.
The installation recommendations contained in this document assume favourable general conditions. FEIG
ELECTRONIC GmbH assumes no liability for the proper operation of the equipment in third-party
environments.
FEIG ELECTRONIC GmbH provides no warranty that the information in this document is not subject to
foreign copyrights. By providing this document, FEIG ELECTRONIC GmbH does not grant any licenses to its
own or third-party patents or any other intellectual property rights.
Only the direct contracting parties shall be entitled to warranty claims against FEIG ELECTRONIC GmbH;
warranty claims are non-transferable. Warranty is only given for the products delivered by FEIG
ELECTRONIC GmbH. We do not accept any liability for the complete system.
The description of the products, their deployment, capabilities and performance specifications will not be
considered as assured properties and are subject to technical changes.
