FUZ2 -A/-B/-C/-CX/-G/-L
Assembly instructions
TST
FEIG ELECTRONIC GmbH
Page 10 of 96
TST_FUZ2-A-B-C-CX-G-L_Montageanleitung_EN_22.docx
1.1 Intended use
•
The TST FUZ2 controller is designed for operation with an electrical induction motor with a power
consumption of up to 1.5 kW supply. It may only be used for the operation of motor-driven doors and
gates used in an industrial or commercial context, as defined by the door product standard DIN EN
13241.
•
Intended use includes compliance with all the specifications made in this assembly manual pertaining to
assembly, installation and start up, the applicable safety instructions and consideration of the technical
data.
•
The controller may only be operated with accessories authorized by FEIG ELECTRONIC GmbH.
•
All assembly, installation, commissioning and maintenance work performed on doors or gates or on the
drive units intended for the doors or gates are to be performed exclusively by qualified specialist
personnel as defined by the EC Machinery Directive. In particular, the following regulations require
compliance: VDE 0100, EN 50110, EN 60204, EN 60335 inc. part 103, the fire protection regulations,
accident prevention regulations and the applicable regulations for industrial doors (EN12453, EN12978)
and machine safety (EN ISO 13849, EN 62061).
1.2 Incorrect use
Incorrect use includes all use of the controller which is classed as non-intended use. .
This device is not intended for use by persons (including children) with limited physical, sensory or mental
abilities or with a lack of experience and / or knowledge, unless they are supervised by a person responsible for
their safety or if they have received instructions on the use of the device. Children should be supervised to
ensure that they do not play with the device. Keep remote controls away from such persons.
Should the controller be subject to any use other than that described, the operating company will be liable for
the resulting damage. This applies to unauthorised alterations, modifications or programming to the controller
and its components as well as ignoring of warnings and safety instructions.
The following points in particular are classified as incorrect:
•
Use outside the specified assembly conditions and safety distances to the surroundings (place and
temperature).
•
Use in an explosive or easily flammable environment.
•
Use with defective parts.
•
Use with spare parts and extension boards, which have not been approved by FEIG ELECTRONIC
GmbH.
•
Use without safety devices.
