TST
Assembly instructions
FUZ2 -A/-B/-C/-CX/-G/-L
FEIG ELECTRONIC GmbH
Page 43 of 96
TST_FUZ2-A-B-C-CX-G-
L_Montageanleitung_EN_22.docx
6.6 Light curtain TST LGB
The light curtain TST LGB can be used as the sole safety device. Please make sure that the door blade
completely covers the light lines of the light curtain.
The TST LGB also permits the automatic teach-in of the end position CLOSED.
Optionally, the TST LGB can assume other functions. In these cases, additional safety devices
must be attached to the door.
6.6.1
Installation of the TST LGB
Mount the light curtain in accordance with the assembly instructions TST LGB!
Blanked out
by door
OUT1:
Danger zone
OUT2:
Object zone
Electronic limit
switch
Junction
box
Door controller
Control cable
7 wires
Encoder
cable 4 wires
Light curtain cable 4 wires (Transmitter) / 8 wires (Receiver)
Figure 23: Installation of the TST LGB
