Horizontal Stabilizers
Remove lower hatch and set aside.
Slip one large and one thin nylon washer on the stab
spar and insert into bearing box. Check for at least
40mm throw as you move stab. Use the minimum
number of nylon washers to achieve clearance.
Tighten and loosen control horn bolts one time to ease
installation.
Option: you may choose to replace the FB clevis with
a heavy duty ball link (see pictures). If so, drill out the
middle hole on the control horn for the bolt that will
attach the titanium FB ball end to the horn now. Use
the wire size drill that is just large enough to insure the
bolt will fit with no play.
To tighten the horn bolts, you will need an allen
wrench, an allen bit (see photo) and patience!
FEI BAO T45
5