Construction
Carefully inspect all components. Check the security
of all bolts and nuts. Seal with a small amount of thin
CA for extra security. If any of the stab bearing plate
bolts are stripped, re-tap holes and replace with 6-32
cap head bolts. Reinforce bearing plate and stab
former with extra Aeropoxy. See photos
Join Fuselage Halves
Position front of fuselage to rear of fuselage. Loosely
secure in place with four XXX bolts and washers at
the aft attach points and two XX bolts and large
washers on the side attach points. Use Loctite.
Position top hatch in place and fit canopy. When
everything aligns, permanently tighten 6 bolts.
FEI BAO T45
4