Fuel System
You can choose to install the smaller tank flat on top of
the larger tank, or if you wish to leave more room
above the engine for a smoke tank, follow the
installation procedure outlined below. Details for
smoke tank installation are at the end of the manual.
Optional: disassemble the stopper assemblies from
the tanks and inspect for kinks, tube constriction from
the cutting process or burrs at the ends of the copper
tubes. If you want to move to 3/16 inch tubes, drill the
steel stopper plates at this time. You may wish to
replace the pickup tubing supplied with high quality
large Tygon. Wire tie all internal connections.
Leak check both tanks.
Cut a piece of hard foam to sit under the main tank.
FEI BAO T45
13