mr.steam
®
Installation, Operation & Maintenance Manual
__________________________________________________________________________
I
N
S
T
A
L
L
E
R
17
OPTIONAL CONDENSATION PAN
MrSteam strongly recommends the use of a conden-
sation pan in the unlikely event of a plumbing leak.
Locate the condensation pan on a solid level surface
and place the steam generator inside the condensa-
tion pan. Insure the steam generator is level (see
page 5 for locating the steam generator).
All plumbing shall be performed by a qualified
licensed plumber and in accordance with applicable
national and local codes. Check local plumbing
code for receptor, trap and vent requirements.
Condensation pans drain by gravity.
The condensation pan is equipped with an integral
female
3
⁄
4
" NPT fitting.
Do not plumb the generator drain and
condensation pan drain together in such a way that
will cause drain water to back into condensation pan.
OPTIONAL EXPRESS STEAM
®
(only available factory installed)
Available for all MS Models. Express Steam genera-
tors are equipped with a low power heating element
and thermostat to keep the water in the tank warm
enough to bring up steam quicker. All Express Steam
components and wiring are installed at the factory.
No additional wiring or plumbing is required by
installers.
All drawings are for illustrative purposes only
