mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
IMPORTANT NOTE:
Do not apply
excessive amounts of silicone. Do not apply
silicone to any other parts of the control
including the adhesive gasket.
STEP 7
Diagram 6
Insure the mounting surface is clean and dry
as required for good adhesion. Hold the
control with the LED display in the 12 o'clock
position and press the control against the wall
u ntil the adhesive sticks and holds firmly.
Control may have to be supported or secured
until the silicone fully cures and bonds.
7
DIAGRAM 6
Drawings for Illustrative Purposes Only.
