mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
14
iTempo/Plus
™
Operating Instructions
(cont.)
mr.steam
temp
aroma
SETTING THE CLOCK
Diagram 3
When the display is not flashing: Press and hold the
TIME key until the display starts flashing.
Use the UP/DOWN keys to select the desired time,
at this time the AM/PM logo will be displayed.
Press the TIME key to save changes.
NOTE:
The clock can only be set when the
generator is off.
SETTING THE STEAMBATH DURATION
Diagram 4
Press TIME key to set or display the steambath dura-
tion time on the clock. The control is pre-set and will
display a TIME setting of 20 minutes (default set-
ting). With the TIME or CLOCK displayed, press the
UP or DOWN keys (Diagram 5) to set the desired
duration time (2-60 minutes) in two minute incre-
ments.
Set the steambath duration according to personal
preference, however it is highly recommended to
begin steambathing at a very short duration to
gauge comfort and safety levels. The control will
turn off when the duration period times out. Then,
the clock time will be displayed.
DIAGRAM 3
DIAGRAM 4
DIAGRAM 5
