![Feel Good mr.steam iTEMPO Installation, Operation & Maintenance Manual Download Page 14](http://html.mh-extra.com/html/feel-good/mr-steam-itempo/mr-steam-itempo_installation-operation-and-maintenance-manual_548553014.webp)
mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
12
DIAGRAM 3
Display
Up Key
Pause Key
Down Key
ON/OFF
Key
mr.steam
DIAGRAM 4
TIMER FEATURE
When the control is turned ON a 60 minute time du-
ration is initiated. The control will turn off after 60
minutes unless the control is turned off manually.
MEMORY FEATURE
If the control is turned off manually before 60 minutes
then the default temperature of 110˚F will be used
the next time the control is turned on. If the control
times out at 60 minutes (not manually turned off) then
the previous user temperature setting will be used
when the steambath is used again.
SETTING THE TEMPERATURE
Diagram 3
The control is pre-set and will display the temperature
setting of 110˚F (default setting). Use the UP and
DOWN keys to change the temperature setting from
80˚ F to 120˚ F in one degree increments.
CHANGING THE TEMPERATURE UNITS
(F˚/C˚) Diagram 4
When the generator is Off, Press and hold ON/OFF
key for 10 seconds. The temperature units will be dis-
played as Fahrenheit (TuF) or Celsius (TuC). Use the
UP/DOWN keys to choose between (TuF) and (TuC).
Press ON/OFF key to accept the new units and exit.
Drawings for Illustrative Purposes Only.