11
mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
The iTempo Control features programmable digital
temperature control, a fixed (60) minute duration,
ON/OFF and PAUSE. The control can be set at a
temperature range from 80˚
F
up to 120˚
F
Set the steambathing temperature
according to personal preference, however it is
highly recommended to begin steambathing at a
low temperature setting for a very short duration to
gauge comfort and safety levels.
ON/OFF
Diagram 1
Press the ON/OFF key to start or stop the flow of
steam. Steam will begin to flow a few minutes after
the control is turned ON. The duration required for
the steam room to reach steambathing tempera-
tures depends on the steam room construction and
steam generator specifications. Steam may continue
to flow for a short time after the control is turned
OFF.
PAUSE FEATURE
Diagram 2
If a pause in steam flow is desired press the PAUSE
key. The display will flash while the control is in the
PAUSE mode. The timer will continue to countdown
while in the PAUSE mode. Steam may continue to
flow for a short time after pause is pressed.
DIAGRAM 1
DIAGRAM 2
iTempo
™
Operating Instructions
WARNING
!
Drawings for Illustrative Purposes Only.
