Series ’90 Hot Deli
Page
9
Temperature Control Adjustment
Each well has a separate temperature control. Turn the control to the appropriate numbered position for
either wet or dry operation depending on the type of product stored. The temperature control should be set
at the lowest possible number that will maintain proper product temperature. The pilot light will go off
when the well(s) have reached a set temperature.
The infrared heater has a separate power switch and temperature control. Turn the temperature control to
the lowest possible number that will maintain proper product temperature. The pilot light will go off when
the heater reaches the set temperature.
Rear Wrapping Board
The rear wrapping board is attached to the back side of the case and can be put into position by swinging it
up and pushing it forward. It can also be removed completely by lifting it upward off its mounting track
while the wrapping board is in the down position.
Light Replacement
When replacing lights, use direct equivalents to the original bulbs.
Doors
The doors can be removed by lifting the door up until the bottom clears the lower door track.
Clean the door track frequently for easy door operation. A very light film of lubricant, such as PAM, will
help the doors slide easily
