Series ’90 Hot Deli
Page
7
DANGER:
Improper or faulty hookup of electrical components in
the display case can result in severe injury or death.
ELECTRICAL INFORMATION & GROUNDING
This Case Must Be Grounded
All case electrical connections must be performed only by a licensed electrician.
All electrical wiring hookups must be done in accordance with all applicable local, regional, or national
electrical standards.
A separate circuit for each display case is recommended to prevent other appliances on the same circuit from
overloading the circuit and causing malfunction.
The electrical service must be grounded upon installation.
The case is designed for permanent connection to a power source. A 7/8” diameter hole is provided in the
back of the case for field wiring connections. There is also an access hole in the case for running the power
supply up through the floor. See diagram below.
The electrical connection box is accessible from the rear of the case. See diagram below for location of the
field wiring connection box.
