Chapter 6: Setting Control Pad Options
SmartSiren Platinum Convergence Network
46
Resetting the Control Head to the Factory Default Configuration
To reset the operation and control of network devices to the factory default:
1.
While in Program Mode, press
Button 7
(Figure 6.1 on page 41).
2.
To continue, select another setting to change or press
Button 13
to exit Program Mode. Verify
that the last amber LED turns on when you exit.
Exiting Program Mode
To exit Program Mode
1.
Press
Button 13
(Figure 6.1 on page 41).
2.
Verify that the last amber LED turns on when you exit.
