Chapter 6: Setting Control Pad Options
SmartSiren Platinum Convergence Network
44
2.
To continue, select another setting to change or press
Button 13
to exit Program Mode. Verify
that the last amber LED turns on when you exit.
Figure 6.1
LEDs and buttons associated with Program Mode settings
“Keep alive” timeout menu
Indicates that the Ethernet is on for system configuration and the control pad is in
Program Mode. (See the Configuration Software Manual P/N 2562418.)
Indicates that the control pad is ready to be reset to the factory default configuration
Indicates the button LEDs are selected for DIM or OFF
Indicates that the Park Disable circuit is selected for active high
(ON) or active low (OFF) activation
Indicates that the 10-second beep that is
audible in Program Mode is selected for
ON or OFF
Exits Program Mode
6
9 10
6
7
8
9
10
12
13
Indicates that the Horn Ring circuit is selected for
active high (ON) or active low (OFF) activation
Selecting Active-High Activation of Horn-Ring Transfer
For instructions on connecting the horn-ring circuit for siren-tone control, see “Horn Ring Transfer
(Cable Assembly P/N 17500307)” on page 28.
The default setting is active-low.
To select active-high activation of the Park Input feature:
1.
While in Program Mode, press
Button 10
. LED 10 in Figure 6.1 turns on.
2.
To continue, select another setting to change or press
Button 13
to exit Program Mode. Verify
that the last amber LED turns on when you exit.
