80
Testing and Training
Informer-IP Series C
Federal Signal www.fedsig.com
Testing and Training
After the installation is complete:
• Test the Informer and all accessories from the control point(s) to ensure it is operating
properly.
• Ensure all users are properly trained to use the system before putting the Informer
into service.
• Verify all tone, voice, and text messages contain the correct content per the
emergency operating plan. Alerts should exceed the ambient sound levels by at least
10 dB to ensure they can be heard.
• Conduct testing on a regular basis per facility safety plans to ensure the equipment
remains in working order and operators remain familiar with the use of the
equipment.
Getting Service
If you are experiencing any difficulties, contact Federal Signal Customer Support at
800-548-7229 or 708-534-3400 extension 7511 or Technical Support at 800-524-3021
or 708-534-3400 extension 7329 or through e-mail at [email protected]. For
instruction manuals and information on related products, visit http://www.fedsig.com/
