49
Configuring Informers Using Commander Software (Optional)
Setup, Program, and User Manual
Federal Signal www.fedsig.com
The Send Message to RTU dialog box appears.
Fields
Description
Clear
Counters
Clears the activation and cancel counters for this RTU.
General
Parameters
Sends the following items from the General Parameters screen:
• Alarms
:
Enabled/Disabled.
• Power Fail Detect
:
Enabled/Disabled.
• Trunking Mode
:
Enabled/Disabled.
• Front Porch
:
Dead carrier time before data transmission.
• Commander revision information.
Program
Sends the Informer its personality data including the following
information:
• Configuration data from the Configure RTU window of Configure
RTU Parameters.
• Program data from the Program RTU window of Configure RTU
Parameters.
• Zone configuration information from the Zone window of Base
Status.
• Program Key Fob. See the Configuring the Informer-IP’s Fob
Address section.
• Security Code.
Poll
Sends a poll message to the currently selected Informer, and then
Commander waits for poll acknowledgment.
Quit
Terminate the Send Message to RTU window without sending any
message.
11. Click Program to store Function programming in the Informer.
12. When programming is completed, click Quit.
Function programming for that Informer is complete.
