65
Configuring Informers Using Commander Software (Optional)
Setup, Program, and User Manual
Federal Signal www.fedsig.com
7. Click Add All to sound all sites in your system. All Sirens appears in the Destination
RTU field.
8. Select from the Function list.
NOTE: Use the table in Appendix B to record information
9. Click Save.
A Warning dialog box appears.
10. Click OK. The button you selected is changed. To change additional hotkeys, repeat
steps 4 through 9.
11. Uncheck the Program Mode check box.
12. Click Quit.
11. Programming Listening Options
The I-IP-IO, I-IPW, I-IP15, Informer15, and Informer100 devices have the ability to do the
following: listen only, two-way intercom, or record conversation, unless disabled. You can
program each Informer independently to allow specific listening options. Recordings are
stored on the local PC/server for playback/storage.
NOTE: The Informer-PA and I-IPSIU devices do not have listening options.
Review wiretapping laws before listening or recording any conversation. You
may need to get consent from all parties that you intend to record.
To enable recording:
1. From the Commander main window, click Informer.
The Informer dialog box appears.
2. Click the Record check box.
If the Record check box is checked, the Informer Talk and Listen chat session is
recorded until the Intercom session is ended by clicking the End Call button.
