48
Configuring Informers Using Commander Software (Optional)
Informer-IP Series C
Federal Signal www.fedsig.com
Fields
Description
Program
Entries
Displays the number of program entries that are currently stored in
memory. This number is zero if no program entries are currently stored in
memory.
Function
Select
Contains a list of available functions.
To add a function, select the desired function, and then click Add >. The
new function is inserted after the selected item in the Function List box.
Function
List
Functions are executed in the order they appear in the list.
To remove a function, select the desired function from the Function List,
and then click < Remove. Click < Remove All to remove all functions from
the Function List.
Add
Click add to add the function to the RTU.
5. Select the desired function from the Function Select list.
6. Click Add >. The selected function is inserted in the Function List box.
7. Continue to add functions to the Function List until completed. Click Save.
NOTE: Use the Table in Appendix B to record information.
8. If additional Functions are to be created, use the Add button to create a new blank
Function. To move between different functions, use the arrow buttons to scroll
through the Function Numbers. See “Table 9 Function Definitions” on page 50 for
a list of all the functions.
9. Click Save to store Function programming on Commander.
The Configure RTU General Parameters dialog box is now active.
10. Click Send to send the program information to the Informer.
