81
Appendix A Updating RTU Firmware
Setup, Program, and User Manual
Federal Signal www.fedsig.com
Appendix A Updating RTU Firmware
To update the RTU firmware, do the following from Commander:
1. Select Tools > Update RTU Firmware.
The following dialog box appears.
Fields
Description
Sites
Displays the RTUs you can program.
NOTE
: Each model requires different software; therefore, only one model
may be programmed at a time.
Add >
Adds the selected RTU from the Sites list to the Selected list.
Add All >
Adds all the RTUs listed in the Sites list to the Selected list.
< Remove Removes the selected RTU from the Selected list to the Sites list.
< Remove
All
Removes all the RTUs from the Selected list to the Sites list.
Selected
Displays the selected RTUs from the Sites list.
Show
Version
Displays the software version of the selected RTUs.
Send
Click to send your firmware to your RTU.
Firmware
Filename
Displays the selected firmware.
Select
Displays the Select HEX file dialog box. Select the appropriate hex file
based on selected the RTU type.
2. Select the RTU from the Site list, and then click either Add > to add a single RTU or
click Add All > to add all the RTUs in the Sites list.
3. Click Select. The Select HEX file dialog box appears. Select the firmware file.
For the Informer100 Speaker it is IP100_x_x_x_x.HEX, where x is the version number.
4. Click Open to populate Firmware Filename.
