58
Configuring Informers Using Commander Software (Optional)
Informer-IP Series C
Federal Signal www.fedsig.com
Fields
Description
Display Tab Informer devices contain a Display tab to configure the operation of a
scrolling message display. The scrolling message display is an optional
accessory that attaches to the Informer to display text messages on a
large overhead LED display.
Mode
:
Configures how the message is displayed.
Color
:
Sets the color of the displayed text.
Duration
:
Sets how long the message is displayed:
• While Armed: Message is displayed while the unit is armed. Choose
this option if it is desired to display the message for the duration of
function activation.
• Until Reset: Displays the message until a Master Reset command is
sent or the Reset button is pressed.
• Timed: Displays message for a fixed-time duration
• Display Time/Date when expire
:
Check to display the time and date
during standby. If this option is not checked, the display is blank
during standby.
Font Selection:
• Normal: Standard height and width
• Full Height: For multiple line displays the height is adjusted to the
full height of the display
• Wide: Characters displayed slightly wider than the standard font
• Double Wide: Characters displayed double the standard width
Message
:
Enter the message to display in the Message box. Keep
message short and to the point.
Mass
Notification
Tab
Requires CommanderOne
®
. Informs CommanderOne that the activation
template was activated. You can use to activate other MNS Systems.
3. Enter the name of the Activation Template in the Name field.
4. Click Add > to add the RTUs from the Individual, Zone Group A, and Zone Group B list
boxes.
5. Click the Function arrow to select the function to be sounded.
6. Optional: Select the Repeat All Call 3 times to Enable all call repeats (typically used
for radio systems).
