FCI Watermakers MAX-Q+, User Manual & Installation Manual

Page: 86 / 170

FCI WATERMAKERS, INC. 86 Operational Instructions
STATS SCREEN
The Stats Screen gives the user feedback on a number of different items.
Hour Meter
– Indicates the number of run hours on the unit.
Life Monitor –
•
Pre-Filter
. Indicates the current life of the pre‑filter while the unit is running.
• FWF Filter
. Indicates the life of the FWF Filter. The system will warn you when the
filter needs to be changed, once changed you will reset the filter on this screen.
• HPP Oil
. Indicates the life of the High Pressure Pump Oil. The system will warn you
when the oil needs to be changed. Once changed you will reset the oil on this screen.
When you take delivery of your unit the oil life monitor will be in
the yellow area. This is because you will need to change the oil after
approximately fifty run hours. In addition to the Life Monitor display, the
control system will warn you when this is needed to be completed.
Total Gallons Produced – This shows the total number of gallons the unit has produced.
Total Gallons Produced Since Last
– This shows the total number of
gallons the unit has produced since the last time the unit was started.
Clear
– Press this button to clear the system once a shutdown has taken place.
Stop
– Press this button to stop the system.
Navigation Bar
– This allows the user to easily navigate between main screens.
Left Arrow – Goes back to the main setup screen
DISPLAY SCREENS
(continued)