FCI Watermakers MAX-Q+, User Manual & Installation Manual

Page: 20 / 170

FCI WATERMAKERS, INC. 20 Pre-Installation
Avoid skin and eye contact with the membrane packaging solution. In
case of skin contact, rinse the skin thoroughly with water. In case of eye
contact, flush repeatedly with water and notify a physician immediately.
R.O. membrane elements are stored in “sodium bisulfite.”
NEVER
mount liquid-holding component above any electrical or
electronic device. Extensive damage to the electronic device will result if
liquid enters device during maintenance and or component failure.
CONNECTION LINE CAUTIONS
— All connection lines
should be as short and straight as possible using minimum
fittings. The connection lines must not be “kinked.”
ACCESSIBILITY CAUTIONS
— This is a simple rule: Install the system
and its supporting components in an accessible manner. The electrical control
display or panel must be accessible for operation and monitoring of the system.
ELECTRICAL POWER REQUIREMENTS
— Ensure that
the power source is sufficiently sized to provide the correct voltage
and cycles during start up and operation. If unsure, please consult
with your local installation specialist or qualified electrician.
PRE-INSTALLATION
(continued)