FCI Watermakers MAX-Q+, User Manual & Installation Manual

Page: 90 / 170

FCI WATERMAKERS, INC. 90 Operational Instructions
INITIALIZE SEQUENCE
During the Initialize Sequence, the HPP turns on. The pump status is verified
by the Low Pressure Transducer. It must be greater than 7 PSI or the system
will shut down. During this time if the unit is equipped with APC, the High
Pressure Control Valve will start to slowly close until the desired production
rate is achieved. If your system is not equipped with APC, you will start to turn
your High Pressure Valve clockwise until you reach your production rate.
When the system is in Initialize Sequence:
LPP – is on
HPP
– is on
FWF Valve
– is closed
Quality Valve
– directed overboard
APC (if equipped)
– is starting to close
The Initialize Timer counts down from its setpoint (Initialize Timer
Setpoint) which is entered by the operator. Once the timer reaches zero, the
timer has expired and the system then moves to Running Sequence.
Timer
– Indicates time left in seconds for the Initialize Sequence.
Low Pressure
– Shows the Low Pressure Transducer reading.
High Pressure
– Shows the High Pressure Transducer reading.
Brine Flow
– Shows the Brine Flow Meter reading.
Clear
– Press this button to clear the system once a shutdown has taken place.
Stop – Press this button to stop the system.
Navigation Bar – This allows the user to easily navigate between main screens.
Right Arrow – When pressed, system will proceed to the Running Sequence.
SYSTEM FUNCTIONALITY
(continued)