FCI Watermakers MAX-Q+, User Manual & Installation Manual

Page: 66 / 170

FCI WATERMAKERS, INC. 66 Operational Instructions
STATUS INDICATOR
The Status Indicator shows a quick overview of what is active in
the system and if there is any alarm conditions present.
LPP – This shows the status of the Low Pressure Pump:
• Green = Pump On
• Grey = Pump Off
HPP – This shows the status of the High Pressure Pump:
• Green = Pump On
• Grey = Pump Off
TDS
– This shows the status of the product quality (Total Dissolved Solids):
• Green = Quality Valve Open/Water Quality Below Setpoint
• Flashing Green = Quality Valve Closed/Checking Water Quality
• Red = Quality Valve Closed/Water Quality Above Setpoint
STATUS BAR
The Status Bar shows a quick overview of what is active in the
system and if there is any fault alarm conditions present.
Grey – System is not active and in standby mode.
Flashing Green – System is active, and is either priming or initializing.
Green – System is active and running.
Red – System is shutting down.
Flashing Blue – Fresh water flush delay is active and will start soon.
Blue
– Fresh water flush is active.
DISPLAY OPERATIONAL OVERVIEW
(continued)