FCI Watermakers MAX-Q+, User Manual & Installation Manual

Page: 63 / 170

FCI WATERMAKERS, INC. 63 Operational Instructions
V4 CONTROL SYSTEM OVERVIEW
The V4 Control System was specially designed by FCI Watermakers for our
reverse osmosis systems. The system is designed to be run either locally
via the display, or remotely via remote display or remote IP access.
The V4 Control System continuously monitors all inputs and
controls all outputs for proper machine operation,
The Control System is designed to make machine operation as simple as
possible for the operator. Once the operator places the machine into production
with the appropriate setpoints, the Control System automatically sequences
all controlled devices in order to ensure the proper amount of fresh water
is delivered. In addition, water quality, flow rates, filter life, pressures, and
pump status are all monitored to ensure safe and reliable operation.
All operation, machine setup, and calibration is performed via the display, with factory
default settings stored permanently in the system in addition to a user savable settings.
SAFETY
The V4 Control System has four different processes to ensure the safety
of the personnel operating the unit and also the unit itself. The process
the V4 Control System uses depends on the severity of the issue.
• Notification
• Warning
• Alarm
• Shutdown