FCI Watermakers DOCKSIDE TREATMENT SYSTEM PLUS Series, User Manual & Installation Manual

Page: 25 / 80

FCI WATERMAKERS, INC. 25 Installation
3/ INSTALLATION
Read below to understand the overall approach of the install.
COMPONENTS SUPPLIED BY INSTALLER
The first section lists the items not included with the system
that you may need to supply for the installation.
DIMENSIONS, WEIGHT, & FOOTPRINTS
Immediately following this overview are diagrams of the DTS
+SOLO
components with their dimensions and footprints, These diagrams
are used to plan where to mount the components.
GENERAL CONNECTION DIAGRAMS
The General Connection Diagram is supplied to provide a one page layout of
how the system components connect. This diagram is used to plan where to
mount the components and as a reference when connecting the plumbing.
SYSTEM INSTALLATION / MOUNTING
This section has instructions on mounting the components. The
footprint and layout diagrams of the previous sections are available
for reference when mounting the system components.
SYSTEM INSTALLATION / PLUMBING
After the mounting instructions, the manual describes the plumbing. General
instructions are provided on how to install the hose ends and fittings. Illustrations
and a table call out the plumbing connections by letter. You are instructed to work
through the hoses and tubes letter-by-letter until the plumbing is connected.
SYSTEM INSTALLATION / ELECTRICAL CONNECTIONS
Power must be wired to the power supply, located in the electrical
enclosure of the DTS
+SOLO
system. If installing by modular mount, the
solenoid cable may need to be replaced with a longer cable.
INSTALLATION CHECKLIST
After the installation is complete, use the list to double check the installation.