7-4
FM5000C - FM5000PLUS
Maternal/Fetal Monitor
User Manual
Under the list screen, you can activate the FETAL module to display the fetus parameter value and waveform.
To activate the FETAL module, access[MAIN MENU]
→
[MONITOR SETUP]
→
[MODULE SETUP] and
set [FETAL] to [ON].
7.1.5
Trend Screen
What displayed on the trendscreen is the dynamic short tendency chart. From the dynamic short tendency
chart, you can see the recent tendency of each parameter. The label of the tendency is displayed above each
tendency chart, with the scale on the leftand the time below, as shown in the figure below:
Figure 7-5 HR dynamic short tendency
The position of the dynamic short tendency chart of each parameter is not fixed. You can change the position
of the tendency chart as needed. Take the SpO2 dynamic short tendency for example, with the steps as follows:
Select the SPO2 dynamic short tendency and select HR in the pop-up list, and then the HR dynamic short
tendency appears at the original position of SpO
2
dynamic short tendency.
To open the trend screen:
(a) Click [SCREENS] on-screen key;
(b) Or access [MAIN MENU] and select [SCREENS]
(c) Select [TRENDSCREEN] to open the trend screen, as shown below:
Figure7-6 Trendscreen
