English | Original instructions
48
22 TECHNICAL DATA
TECHNICAL DATA ON THE REMOTE
Model designations
→
REMOTE FX
REMOTE BX
REMOTE RX
Protection type (in installed condition)
→
IP54
Weight, approx.
→
0.048 kg
Operating temperature
→
-5°C to +40°C (ambient temperature)
Storage temperature (< 1 month)
→
-15°C to +60°C
Storage temperature (> 1 month)
→
-15°C to +25°C
23 DISPLAYS ON THE REMOTE
The LED indicator
[C.5]
/
[C.6]
on the REMOTE consists of 5 LEDs.
• All five LEDs together
[C.5]
serve as a display for the charge level and the pedal
support level set.
• The upper of the five LEDs
[C.6]
also serves as a status indicator, informing you
about the status of your e-bike.
23.1 Status display
The status display
[C.5]
indicates a status change or an existing fault. If no fault is
detected, the status display LED functions as one of the five LEDs
[C.5]
to display
the charge level or the support level set.
The status display LEDs light up in different colours depending on which status is
displayed.
The status display
[C.6]
:
•
flashes green or blue*= “Ready for operation”
Following successful installation of the DRIVEPACK into the e-bike, the status
display flashes green or blue briefly, indicating that you can now switch on the
drive system using the REMOTE.
•
Flashing yellow = “Soft Fault”
If a “Soft Fault” occurs, the status display flashes yellow. In this way, the drive
system indicates that there is a temporary or non-critical fault that in most
cases will result in reduced performance.
* The colour for the “Ready for use” status is either green or blue, depending on the model.