Original instructions | English
41
If the DRIVEPACK does not lock, pull it out again if necessary and then try to insert it
again. Do not use the drive system if the DRIVEPACK cannot be locked to the e-bike.
16.2 Removing the DRIVEPACK from the e-bike
CAUTION
Risk of burns!
The radiator in the DRIVEPACK can become very hot during operation,
which means that you may burn yourself on it.
►
Allow the DRIVEPACK to cool down completely before touching it.
If you press the DRIVEPACK firmly against the frame before releasing
the locking lever, it will be easier to release the DRIVEPACK from the
locking device on the frame when removing it.
1. Secure the DRIVEPACK with one hand.
2. Press the locking lever
[A.5]
up fully with the other hand to release the
DRIVEPACK from the locking device.
A.5
3. Hold the locking lever
[A.5]
in the open position whilst carefully lower the
DRIVEPACK.
4. Then move the locking lever back to the closed position and remove the
DRIVEPACK from the interface
[B.1]
on the BOTTOM BRACKET.
B.1
A.1