Original instructions | English
45
If the distance between the speed sensor and spoke magnet is outside
the specified range, or the speed sensor is not correctly connected, the
drive system will work in “Soft Fault” mode.
More detailed information can be found
→
in chapter 23.1 “Status display”.
19.2 Correcting incorrect position/alignment
If you notice that the drive system is in “Soft Fault” mode because the speed
sensor
[B.2]
and spoke magnet
[B.4]
are not correctly aligned, proceed as follows:
1. Using a screwdriver, carefully loosen the fixing screw
[B.5]
on the spoke
magnet.
2. To set the correct distance between the mark on the speed sensor
[B.3]
and
the spoke magnet
[B.4]
:
• Move the spoke magnet vertically on its spoke (up/down) if necessary.
• Turn the spoke magnet around its own axis if necessary.
B.5
B.5
B.4
B.4
3. If the problem cannot be solved, do not use the e-bike and contact an author-
ised specialist to have the fault rectified.
