English | Original instructions
56
27 USING THE BATTERY
27.1 Checking and switching on BATTERY
WARNING
Risk of explosion and fire!
A damaged or dirty battery may explode and/or cause a fire.
►
Never insert a damaged BATTERY into the DRIVEPACK.
►
Check the BATTERY for visible damage, such as cracks or burn
marks, before each insertion.
►
Make sure that the interfaces on the BATTERY are free of dirt
before using it.
You can query the charge level of the BATTERY at any time, by pressing
the on/off button
[D.7]
1×: The number of illuminated LEDs on the
charge level indicator
[D.4]
indicates the charge level. Each illuminated
LED therefore corresponds to 20% of the total charging capacity. When
the BATTERY is fully charged, all 5 LEDs light up.
1. Check the BATTERY for visible damage (visual
inspection).
2. Press the on/off button
[D.5]
on the BATTERY 1×
to switch on the BATTERY:
The LEDs of the charge level indicator
[D.4]
next
to the on/off button light up and indicate the
current charge level of the BATTERY.
If none of the LEDs on the charge indicator light up after pressing the on/off
button, this indicates that the BATTERY is damaged.
In this case, do not insert the BATTERY into the DRIVEPACK, but contact an
authorised specialist.
27.2 Inserting the BATTERY into the DRIVEPACK
1. Hold the DRIVEPACK with one hand and the BATTERY with the other.
2. Position the BATTERY with the interface
[D.2]
forwards in front of the empty
battery holder
[A.4]
and align it so that the battery lock push button
[D.1]
is on
the same side as the corresponding opening on the DRIVEPACK.
D.5
D.4