FAZUA RIDE 50 TRAIL/STREET Original Instructions Manual Download Page 65

Page: 65 / 68

Freigabeversion

Original instructions | US-English

TECHNICAL DATA ON THE CHARGER

Charging current

→

2 A

Charging time, approx.

→

3.5 h

Protection class

→

2 [symbol: ]

Protection type

→

IP54

Weight, approx.

→

0.850 lbs (0.39 kg)

Operating temperature

→

32 °F to 113 °F (0 °C to +45 °C)

Storage temperature

→

32 °F to 113 °F (0 °C to +45 °C)

30 USING THE CHARGER

DANGER

Risk of electric shock and fire!

Using a damaged CHARGER may expose you and others to the risk of

electric shock. Improper handling of the CHARGER or attempting to

charge an incompatible battery with the charger could cause a fire.

►

Before using the CHARGER, check all individual parts for damage.

►

Never use a damaged CHARGER.

►

Only use the CHARGER in dry indoor areas.

►

Keep water or any other fluids away from the CHARGER and all

individual CHARGER parts.

►

The CHARGER and BATTERY heat up during charging, so keep away

from combustible materials and do not leave the two components

unattended during charging.

►

During charging place the CHARGER and BATTERY on a well

ventilated surface.

►

Only use the CHARGER to charge an original and compatible BATTERY

from FAZUA.

►

Never attempt to charge non-rechargeable batteries!

30.1 Preparing the CHARGER

1. Pick up the mains adapter

[E.1]

and the power cord

[E.4]

2. Plug the appliance plug

[E.6]

of the mains cable into the mains socket

[E.7]

the mains adapter.

Summary of Contents for RIDE 50 TRAIL/STREET




































































Search results

Summary of Contents for RIDE 50 TRAIL/STREET

Reviews:

Related manuals for RIDE 50 TRAIL/STREET

Brands by name

Popular brands

FAZUA RIDE 50 TRAIL/STREET, Original Instructions Manual

Search results

Summary of Contents for RIDE 50 TRAIL/STREET

Reviews:

Related manuals for RIDE 50 TRAIL/STREET

Brands by name

Popular brands