FAZUA RIDE 50 TRAIL/STREET Original Instructions Manual Download Page 66

Page: 66 / 68

Freigabeversion

US-English | Original instructions

30.2 Connecting the CHARGER to the BATTERY

DANGER

Risk of electric shock!

If the mains connection is incorrect, you and others may be exposed

to the risk of electric shock.

►

Connect the CHARGER to the BATTERY first before connecting the

CHARGER to the power supply.

►

Connect the CHARGER to an easily accessible and properly installed

power outlet.

►

Make sure that the mains voltage at the mains connection corre-

sponds to the information on the CHARGER.

1. Open the cover flap to access the charging socket

[D.3]

on the BATTERY.

2. Plug the charging plug

[E.3]

on the CHARGER into the charging socket

[D.3]

the BATTERY.

E.3

D.3

3. Plug the power plug

[E.5]

into a suitable wall outlet to establish the power

connection.

The charging process starts automatically after connection to the

mains.
During the charging process, the

LED indicator [E.8]

on the mains

adapter lights up

red

to indicate that the

BATTERY is charging

When the color of the

LED indicator

changes to

green

, this indicates

that the

BATTERY is fully charged

Summary of Contents for RIDE 50 TRAIL/STREET




































































Search results

Summary of Contents for RIDE 50 TRAIL/STREET

Reviews:

Related manuals for RIDE 50 TRAIL/STREET

Brands by name

Popular brands

FAZUA RIDE 50 TRAIL/STREET, Original Instructions Manual

Search results

Summary of Contents for RIDE 50 TRAIL/STREET

Reviews:

Related manuals for RIDE 50 TRAIL/STREET

Brands by name

Popular brands