![Fayat BOMAG BW 100 ADM-5 Operating Instruction Download Page 49](http://html1.mh-extra.com/html/fayat/bomag-bw-100-adm-5/bomag-bw-100-adm-5_operating-instruction_3686662049.webp)
3.9 Emergency procedures
3.9.1 Actuating the emergency stop switch
In events of emergency and in case of danger
actuate the emergency stop switch immedi-
ately.
The machine is braked immediately, the engine
is shut down.
Restart the machine only after the danger that
caused the actuation of the emergency stop
switch has been eliminated.
In case of frequent use the wear on the multi-
discs brakes will be very high, you should
therefore never use the emergency stop switch
as a service brake.
3.9.2 Disconnecting the battery
In events of emergency, e.g. in case of a cable
fire, disconnect the battery from the vehicle
network.
Pull out the main battery switch or lift off the
battery pole to do so.
3.9.3 Towing the machine
Tow the machine only in case of emergency or
to avoid an accident.
Before releasing the parking brake apply suit-
able measures to secure the machine against
unintended rolling.
Use a tractor vehicle with sufficient traction and
braking power for the unbraked towed load.
You should generally use a tow bar.
Concerning your safety – Emergency procedures
BW 100 ADM-5
49
Summary of Contents for BOMAG BW 100 ADM-5
