manualshive.com logo in svg

Fayat BOMAG BW 100 ADM-5, Operating Instruction

Share
Download
Fayat BOMAG BW 100 ADM-5 Operating Instruction Download Page 170

8.10  Every 1000 operating hours
8.10.1  Checking, adjusting the valve clearance

NOTICE!

Danger of engine damage!

We recommend to have this work

carried out by trained personnel or

our after sales service.
– Before checking the valve clear-

ance let the engine cool down for

at least 30 minutes. The engine

oil temperature must be below

80 °C (176 °F).

Valve clearance

Intake / exhaust

valve

0.15 mm
(0.006 in)

Protective equip-

ment:

n

Working clothes

n

Safety shoes

n

Protective gloves

1.

Park the machine safely

 

Ä

 Chapter 6.9

‘Parking the machine in secured condition’

on page 117

.

2.

Allow the engine to cool down.

3.

Remove the valve cover.

B-462-0081

Fig.  158

Maintenance – Every 1000 operating hours

 

BW 100 ADM-5

 

170

Summary of Contents for BOMAG BW 100 ADM-5

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands