Fayat BOMAG BW 100 ADM-5, Operating Instruction

Page: 45 / 216

Always keep a sufficient distance when
passing through subways, under bridges, tun-
nels, electric power lines etc.
Do not drive with the attached hydraulic
hammer
(optional equipment)
.
Do not operate the rotary switch for the
hydraulic hammer
(optional equipment)
while
driving.
3.7.2 Driving up and down slopes
Do not drive on gradients or slopes exceeding
the maximum gradeability of the machine
Ä
Chapter 2 ‘Technical data’ on page 13
.
Drive extremely carefully on gradients and
always directly up or down the slope.
Soil conditions and weather influences impair
the gradeability of the machine.
Wet and loose soil considerably reduces trac-
tion of the machine on inclinations and slopes.
Increased danger of accident!
3.7.3 Cross slope
The tipping angle was measured statically on
level, hard ground with the machine stopped
and without steering.
The max. permissible inclination of the
machine may be limited by the max. permis-
sible slanted position of the engine.
The specified angle must not be exceeded.
With loose soil, acceleration/deceleration, run-
ning vibration, steering or attached accessories
the tipping angle may be considerably lower.
Fig. 9
Concerning your safety – Driving the machine; working operation
BW 100 ADM-5 45