![Fayat BOMAG BW 100 ADM-5 Operating Instruction Download Page 103](http://html1.mh-extra.com/html/fayat/bomag-bw-100-adm-5/bomag-bw-100-adm-5_operating-instruction_3686662103.webp)
6.4 Travel mode
6.4.1 Preliminary remarks and safety notes
Before starting to drive make sure that the
driving area is absolutely safe.
DANGER!
Danger to life caused by the
machine turning over!
– Never drive across a slope.
– Always drive straight up or down
a slope.
Do not drive on gradients exceeding the max-
imum gradeability of the machine.
Soil conditions and weather influences impair
the gradeability of the machine.
Wet and loose soil considerably reduces trac-
tion of the machine on inclinations and slopes.
Greater danger of accident!
When driving up and down slopes move the
travel lever slowly back towards neutral to
brake the machine.
If the operator leaves his seat while travelling,
the driver's seat warning light lights up.
The warning buzzer sounds.
After approx. 3 seconds, the machine brakes to
a standstill.
Before being able to drive again, the travel
lever must first be shifted to the right into the
parking brake position.
Leaving the seat while
travelling
Fig. 77
Operation – Travel mode
BW 100 ADM-5
103
Summary of Contents for BOMAG BW 100 ADM-5
