Fayat BOMAG BW 100 ADM-5, Operating Instruction

Page: 131 / 216

7.2 Loading the machine
Use only stable loading ramps of sufficient load
bearing capacity.
Loading ramps and transport vehicle must be
free of grease, oil, snow and ice.
The ramp inclination must be less than the gra-
deability of the machine.
Make sure that any persons keep a safety dis-
tance of at least 2 metres while the machine is
driven onto or down from the transport vehicle.
The instructing person should not be inside the
travel range of the machine.
1. Fasten your seat belt.
2.
Set the throttle lever to position “MAX I”.
DANGER!
Danger to life caused by the
machine slipping or turning over!
– Make sure that no persons are in
the danger zone.
3. Drive the machine carefully onto the trans-
port vehicle.
4. Observe the centre of gravity.
5. Switch off the engine and remove the igni-
tion key.
6. Attach and secure the articulation lock
Ä
Chapter 8.2.3.1 ‘Engaging the articula-
tion lock’ on page 143 .
The foldable ROPS can be folded
down to reduce the transport height.
7.
If necessary, fold down the foldable ROPS.
MIN.
MAX II
MAX I
B-880-0160
Fig. 123
Loading / transporting the machine – Loading the machine
BW 100 ADM-5 131